Email steeringclutch@gmail.com
for orders or
questions.
CONTACT
OUR OFFICE at 1-208-342-8911
General Gear and Machine
733 Desert Wind Rd.
Boise, Idaho, 83716 US
JD550 STEERING CLUTCHES
The John Deere Model 550's have oil type
steering clutches and use 8 Friction discs p/n T82355 composite paper faced discs on a
steel toothed base along with 8 steel separator plates p/n T31732. When later JD models were developed they used bimetallic discs to replace the earlier style fiber discs. Some owners prefer the earlier bimetallic friction discs. The bimetallic disc part number is T44129. This was replaced by the paper faced friction discs T82355. Some owners still prefer the Bimetallic discs so it is your choice. The same numbers of discs were used in all circumstances. Most of the time you can get by with only changing the friction discs. The steel separator plates can usually be re-used. Check them for roughness, warping, or dishing and if they are clean, smooth, and straight, by all means re-use them!
ORDERING INFO: All items below are in stock and if you would like to get any of them on the way just let us know! If you are in the US you may call 1-800-531-9021 or if you are outside the US, 1 208 342 8911. You may also email steeringclutch@gmail.com for orders/questions. Our hours are Monday through Friday from 10 am Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time). We are located 20 miles east of Boise, Idaho. FOR A WIDER SELECTION OF ALL OF
OUR DISCS MADE
T44129 BIMETALLIC FRICTION DISCS 24.00 EA Will work for dry type or oil type
cteering clutches
|
email steeringclutch@gmail.com For orders or questions.
|