John Deere JD550B JD555B Steering Clutch DISCS and Parts

Email    steeringclutch@gmail.com      for orders or questions.

 
CONTACT OUR OFFICE at 1-208-342-8911

General Gear and Machine
733 Desert Wind Rd.
Boise, Idaho, 83716  US


JD550B 555B STEERING CLUTCHES

The John Deere Model 550B's (555B LOADER) have oil type steering clutches.  The 550B steering cluches had two different steering clutches.  Before Serial Number 726646 and below they use (8) Friction discs p/n T82355 composite paper faced discs on a steel toothed base along with (8) steel separator plates p/n T31732.

When later JD550B and 555B's were designed, Serial Number 726647 and up.....the clutch pack consisted of (6) T82355 friction discs (P/n T82355 replaced T211817 ) and (6) steel separator plates T82356.   Check the steel separator plates for roughness, warping, or dishing and if they are clean, smooth, and straight, by all means re-use them!
                   uspsfreeshippingicon.jpg (27000 bytes)  Free shipping in US only, Priority Mail or UPS Ground, on orders $500 or higher.

ORDERING INFO: 
GRIMY_Man_SM.jpg (55040 bytes)  We can usually ship on the same day any items we have in stock that do not have to be pulled from a machine. 
We are set up to offer the payment choices of either Visa, Master Card, or the PayPal option (to the account of webmaster@tractorparts.com)
All items below are in stock and if you would like to get any of them on the way just let us know!  If you are in the US you may call  1-800-531-9021 or if you are outside the US, 1 208 342 8911.  For orders/questions.  email steeringclutch@gmail.com
Our hours are Monday through Friday from 10 am Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time).  We are located 20 miles east of Boise, Idaho.

FOR A WIDER SELECTION OF ALL OF OUR DISCS MADE
FOR MANY OF THE JOHN DEERE MACHINES....CLICK HERE


T82355 Paper faced friction discs (8) OR (6) required @ 27.00 ea

T31732 steel separator plates,(8)  required,
$14.00 EA.

T82356 steel separator plates,(6)  required, $16.00 EA.

CLUTCH PACK COST OPTIONS
EARLY CLUTCH BEFORE SER# 726646 OF 8 FRICTION T62355 AND 8 STEEL T31732 = $328.00
LATE CLUTCH AFTER SER#726646 OF 6 FRICITON T82355 AND 6 STEEL T82356 = $258.00


JD_450C_450D_450E_T82355_STEERING_CLUTCH_DISC_PAPER.JPG (340287 bytes)  T82355 FRICTION DISCS, (Replaced T211817) PAPER FACED.  $25.00 EA    
 

T31732_JD450B_CLUTCH_PLATE.JPG (93829 bytes) T31732 STEEL SEPARATOR PLATES  12.00 EA

T82356_STEEL_PLATE_450E_550_555_650G.jpg (213438 bytes) 
T82356 STEEL SEPARATOR PLATES 16.00 EA

JD_T44805_DISC_BIMETALLIC_76_EXT_TEETH_6.46IN_OD.JPG (71276 bytes)    T44805 SHUTTLE CLUTCH FRICTION DISCS    15.00 EA

 

AT142175_BRAKE_BAND_OIL_TYPE_450_550_650.jpg (225950 bytes)        BRAKE BAND...AT142175   ONE PIECE BAND DESIGNED FOR OIL TYPE STEERING CLUTCHES ......$185.00 ea plus UPS/FedEx shipping of $20.00 in the US. These will not ship via Priority Mail Flat Rate boxes but for rush shipping, Priority Mail of $35.00 in the US.    NO CORE CHARGE!



Click HERE to view all of our new steering clutch discs.

 

email steeringclutch@gmail.com  For orders or questions.

visasmalllogo MClogoshrunk 
CONTACT OUR OFFICE at 1-208-342-8911

General Gear and Machine
733 Desert Wind Rd.
Boise, Idaho, 83716  US

*All prices are in USD & do not include shipping
All prices are for new aftermarket unless stated otherwise
All OEM part numbers are for references only