Email firstname.lastname@example.org for orders or questions.
CONTACT OUR OFFICE at 1-208-342-8911
General Gear and Machine
733 Desert Wind Rd., Boise, Idaho, 83716 US
KOMATSU D150A-1 and D155A-1
|We have had steering clutch discs produced,
both friction discs and steel separator plates, for the D150A-1 and D155A-1 steering
Quantities required are based upon your model, serial number, and the condition of your clutch.
Check your clutches closely. You can often get by with only replacing the friction discs. Use your best judgment for evaluating your steel plates. You do not want to install plates that are rough and will accelerate the wear on your new fiber discs. Clean them with wire brushes, sandblasting, or whatever it takes to get them as smooth as possible and then make your decision. It is up to you of course, but unless you just like to pull wrenches, these steering clutches are not that much fun to have to remove and reinstall because you tried to save a hundred dollar bill.
Our hours are Monday through Friday from 10 am Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time). We are located 20 miles east of Boise, Idaho.
175-22-21150 Bimetallic friction
discs 34.60 ea
175-22-21160 Steel separator
email email@example.com for orders or questions.