Email steeringclutch@gmail.com
for orders or
questions.
CONTACT OUR
OFFICE at 1-208-342-8911
General Gear and Machine
733 Desert Wind Rd.
Boise, Idaho, 83716 US
MITSUBISHI BD2C BD2D BD2E BD2F BD2G BD2H
BD2J
BS3D BS3E BS3F BS3G BS3H BS3J SERIES ARE LOADER VERSIONS
|
We have been producing and selling steering
clutch fiber discs and steel separator plates for the BD2 series of crawlers since
2005. We are also providing many new components for your Mitsubishi crawlerdozers
and loaders. The earlier BD2C, BD2D, BD2E, and BD2F (ALSO BS3 SERIES) had steering
clutch friction discs with riveted on linings, then bonded linings and were then replaced
by the fiber discs which we now produce. The same fiber and steel discs fit all the
above series including the Mitsubishi crawler loader versions which were designated by the
"BS3" model number prefix. Six (6) discs each of the fiber 58831-24600 or 55331-03200 (Early fiber disc p/n was 58131-12500) are used per clutch and Six (6) of the steel separator plates 58131-12600 or 58131-12602 are also used when replacing all discs. To read about the new bimetallic friction discs CLICK HERE Depending on the condition of your clutches, you can often get by with only replacing the friction discs. Use your best judgment for evaluating your steel plates. You do not want to install plates that are rough and would accelerate the wear on your new fiber discs. Clean them with wire brushes, sandblasting, or whatever it takes to get them as smooth as possible and then make your decision. These steering clutches are not that much fun to have to remove and reinstall in order to save a hundred dollar bill. THANK YOU!!!! After many years of providing these discs, with higher and higher volumes, we have been able to cut our costs and have now been able to actually reduce the costs to our customers by 30%. In this day if creeping inflation and devaluation of the dollar, that is a pretty good trick! We thank you for your continued business and support. It is you, our customers, that has allowed us to make this price reduction. (The old prices were 31.00 for the fibers, and 24.00 for the steels) WE HAVE ALSO JUST INTRODUCED NEW BIMETALLLIC FRICTION DISCS TO REPLACE THE FIBERS IF YOU CHOOSE. To read about them, CLICK HERE Scroll all the way to bottom to see the Bottom Rollers, Tracks, Carrier Rollers, Front Idlers, and Track Pads available for your track frames.
All items below ON HAND AND IN STOCK and if you would like to get any of them on the way just let us know! If you are in the US you may call 1-800-531-9021 or if you are outside the US, 1 208 342 8911. You may also email steeringclutch@gmail.com for orders/questions. We have shipped these items all over the world and try to use Priority Mail when possible. Our hours are Monday through Friday from 10 am Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time). We are located 20 miles east of Boise, Idaho.
FIBER DISCS p/n 58831-24600 or 55331-03200 (early p/n 58131-12500) (77 external teeth) (6) required per clutch at $22.00 each STEEL PLATES p/n 58131-12600 or
58131-12602 (48 Internal teeth) (6) required per clutch at $17.00 ea
HEAVY DUTY WOVEN LINING WOVEN WITH BRASS
STRANDS, DESIGNED FOR REPEATED USE IN SEVERE CONDITIONS, ABLE TO WITHSTAND HIGH
TEMPERATURE USE (400 DEGREE)WITH MINIMAL LOSS OF COEFFICIENT OF FRICTION OR FADE.
SERVICE AND PARTS INFO
BD2D BS3D BD2E BS3E
BRAKE PARTS DOZERS
|
|
In US only, via Priority Mail, 2-3 day delivery,
on orders $500 or higher. 
